Automatic Down Weighing and Filling Machine for Quilts

1.  Adopts vacuum filling mode, which does not damage down, and can keep down original softness, elasticity and hand feeling.

2.  High precision filling, can choose and set error range, give effective consideration on the contradiction between fillin weight and efficiency, ensure product quality and reduce raw material loss.

3.  Easy operation and save labor cost, it is available tu use single station or double filling stations according to production requirement.

4.  The machine has fully enclosed design, which ensure the production site clean & tidy,plus enhance corporate image.

5.  Fully programmable, controlled by PLC.

6.  High production efficiency, each filling time is 1-5 seconds（depending on the filling weight).

7.  We can provide customized solutions to meet various production requirement.

Environment Requirement

Temperature: Per GBT14272-2011 requirement,filling test temperature is 20±2℃.

Humidity: Per GBT14272-2011, the humidity of filling test is 65±4%RH.

Compressed Airrequirement

Air volume≥0.8㎥/min.

Air pressure≥0.58mpa.

If the air supply is centralized, the pipe should be within 20m,the diameter of the pipe should not be less than 1 inch. If the air source is far away, the pipe should be bigger accordingly. Otherwise, the air supply is not enough, which will cause filling instability.

If the air supply is independent, it is recommended to have 7.5kw or more high-pressure air pump(1.0mpa).