Richpeace embroidery machine / punch embroidery sewing machine troubleshooting-spindle is not in place

　　When the spindle of the Richpeace embroidery machine / punching sewing machine is not in place (the spindle is not at 100.), the machine will not run

　　Solution one:

　　First loosen the two top wires on the encoder, then adjust the main shaft to 100 degrees (picture 1), and then put the wrench on the top wires of the encoder (picture 2), and adjust the encoder up and down until The jog on the operation screen is displayed in green (picture 3), and then the two top wires on the encoder are fixed. If it shows red, there is a problem with the motherboard or encoder

Picture 1                                                           picture2

　　Solution two:

　　Set parking compensation in embroidery parameters

　　The above is the solution to the "spindle is not in place" of Richpeace embroidery machine / punching and embroidery machine. For more problems, please refer to the embroidery machine installation instructions and after-sales consultation.

　　Computerized embroidery machine is an automatic and efficient industrial sewing equipment developed with the continuous application of modern computers. It is a modern and intelligent high-tech industrial sewing and embroidery mechanical and electrical integration that uses computers and machinery to integrate. product.

　　High production efficiency and fast embroidery speed. As the number of heads increases, the production efficiency becomes higher. Each head embroiders the same pattern. With the mass production of light industrial products, computer embroidery machines are more and more widely used in clothing, shoes and hats, crafts, curtains, tablecloths, wallpaper, felts, carpets and so on.