Richpeace Wire Stitching Machine Special for Automotive-Left-Right Feeding Structure

RPCE-WS-10-375(750)x800-P

Apply to automobile heating seat, heating steering wheel wire wiring

Product Video

Product Introduction

  Speed is 750r/min(0.5-4.5mm stitch length), speed will change according to different wire, fabric and patterns.

  Adopt gantry structure, fabric will go into machine from left and pulled out from right to keep no wrinkle on fabric. Max material thickness can be 5mm and 0.8-5mm adjustable height for presser foot.

  Max material thickness can be 5mm and 0.8-5mm adjustable height for presser foot.

  The mini turning radius of wire should be ≥3mm, turning radius will change according to thickness and material of wire.

  Auto wire feeding device( resistance wire or the other wire): Adopt big wire roll device to reduce wire changing time.

  With wire stuck alarm function, if wire was stuck, machine will alarm and stop automatically to avoid increasing unqualified products.

  Pneumatic fabric clamp frame can be opened by manual and with pressure keep function even power off.

  Wire trimmer with anticollision function to avoid crashing frame once knife doesn’t return properly.

  Adopt jumbo size rotary hook to reduce bobbin case changing time and raise efficiency.

  With tension regulation and broken detective function for both top thread and bottom thread.

  Zig-zag stitch type